Enhanced CO₂ Adsorption on Activated Carbon Fibers Grafted with Nitrogen-Doped Carbon Nanotubes

Materials (Basel). 2017 May 7;10(5):511. doi: 10.3390/ma10050511.

Abstract

In this paper, multiscale composites formed by grafting N-doped carbon nanotubes (CNs) on the surface of polyamide (PAN)-based activated carbon fibers (ACFs) were investigated and their adsorption performance for CO₂ was determined. The spaghetti-like and randomly oriented CNs were homogeneously grown onto ACFs. The pre-immersion of cobalt(II) ions for ACFs made the CNs grow above with a large pore size distribution, decreased the oxidation resistance, and exhibited different predominant N-functionalities after chemical vapor deposition processes. Specifically, the CNs grafted on ACFs with or without pre-immersion of cobalt(II) ions were characterized by the pyridine-like structures of six-member rings or pyrrolic/amine moieties, respectively. In addition, the loss of microporosity on the specific surface area and pore volume exceeded the gain from the generation of the defects from CNs. The adsorption capacity of CO₂ decreased gradually with increasing temperature, implying that CO₂ adsorption was exothermic. The adsorption capacities of CO₂ at 25 °C and 1 atm were between 1.53 and 1.92 mmol/g and the Freundlich equation fit the adsorption data well. The isosteric enthalpy of adsorption, implying physical adsorption, indicated that the growth of CNTs on the ACFs benefit CO₂ adsorption.

Keywords: activated carbon fibers; adsorption; carbon dioxide; carbon nanotubes; composites.