Stress Evolution of Amorphous Thermoplastic Plate during Forming Process

Amorphous thermoplastics, as a type of engineering plastic material, are used in various industrial sectors. In order to manufacture high-performance products, it is important to optimize their forming process to mitigate residual stresses. However, stress in a plate is difficult to measure, therefore, modeling provides a powerful way to investigate and understand the evolution of stress. In this study, the forming process of a polyetherimide (PEI) plate was modelled using finite element analysis, and then validated through a comparison with a warpage experiment. This study reveals that the whole forming process can be divided into three stages by the glass transition temperature T_g of the PEI. The second stage, corresponding to the plate cooling from above T_g to below T_g, contributes a large portion of the residual stress in a short time. The final residual stress, the magnitude of which is affected by the cooling rate and plate thickness, shows a parabolic distribution through the thickness of the plate. These important conclusions are beneficial for improving the quality of an amorphous thermoplastic plate, while allowing highly efficient production.