Polyurethane Foams for Thermal Insulation Uses Produced from Castor Oil and Crude Glycerol Biopolyols

Molecules. 2017 Jul 2;22(7):1091. doi: 10.3390/molecules22071091.

Abstract

Rigid polyurethane foams were synthesized using a renewable polyol from the simple physical mixture of castor oil and crude glycerol. The effect of the catalyst (DBTDL) content and blowing agents in the foams' properties were evaluated. The use of physical blowing agents (cyclopentane and n-pentane) allowed foams with smaller cells to be obtained in comparison with the foams produced with a chemical blowing agent (water). The increase of the water content caused a decrease in density, thermal conductivity, compressive strength, and Young's modulus, which indicates that the increment of CO₂ production contributes to the formation of larger cells. Higher amounts of catalyst in the foam formulations caused a slight density decrease and a small increase of thermal conductivity, compressive strength, and Young's modulus values. These green foams presented properties that indicate a great potential to be used as thermal insulation: density (23-41 kg·m-3), thermal conductivity (0.0128-0.0207 W·m-1·K-1), compressive strength (45-188 kPa), and Young's modulus (3-28 kPa). These biofoams are also environmentally friendly polymers and can aggregate revenue to the biodiesel industry, contributing to a reduction in fuel prices.

Keywords: biopolyols; castor oil; crude glycerol; polyurethane foams; thermal insulator.

MeSH terms

  • Castor Oil / chemistry*
  • Catalysis
  • Complex Mixtures / chemistry
  • Elastic Modulus
  • Glycerol / chemistry*
  • Polyurethanes / chemistry*
  • Thermal Conductivity

Substances

  • Complex Mixtures
  • Polyurethanes
  • Castor Oil
  • polyurethane foam
  • Glycerol