Measurement Method of Temperature of the Face Gear Rim of a Spiroid Gear

Sensors (Basel). 2022 Nov 16;22(22):8860. doi: 10.3390/s22228860.

Abstract

Spiroid gears are used to transfer heavy loads with a significant reduction in input speed. Like most toothed gears, they are lubricated with oil whose physical properties change with temperature fluctuations, affecting the durability and reliability of the gear. Bearing this in mind, gear designers plan systems for measuring oil temperature during gear operation at the design stage. The authors of this paper are of the opinion that, in the case of spiroid gears, it may be insufficient to measure only oil temperature during gear operation. It seems that the working temperature of a pair of mating wheels has a decisive impact on the durability and reliability of the gear. The measurement of oil temperature in a tested gear should be treated as a supplementary measurement with the measurement of temperature on the toothed wheels as the basic measurement. Taking into consideration the above, an innovative test bench was designed and built, making it possible to observe how working parameters of the gear (torque and rotational speed) affect the temperature of the lubricating oil, but most of all, the working temperature of the pair of mating wheels. This paper presents, among others, the results of research on the impact of the rotational speed of the input shaft and load on the distribution of temperature on the toothed rim of the face gear.

Keywords: face gear; gear casing; higher torques; lubrication of spiroid gears; spiroid gear; thermal imaging camera; types of spiroid gears; worm.

MeSH terms

  • Cell Communication*
  • Reproducibility of Results
  • Reproduction*
  • Temperature
  • Torque

Grants and funding

This research received no external funding.