Dataset of velocities of dry granular flows in a partially obstructed tilted chute

The dataset provided in this paper refers to an experimental campaign conducted in Laboratory of Fluid Dynamics (LTDF) of the Free University of Bozen-Bolzano at NOI Techpark aiming to understand the movement of granular material in fluids of low viscosity and density exhibited in debris flows. One experimental test was performed consisting of 31 repetitions. In detail, a three-litre volume of granular material (d = 1.8mm) was suddenly released from an upstream reservoir in a 1.5 m long acrylic chute tilted at 19 degrees and stopped in the outlet area by a vertical barrier. This vertical barrier used is adjacent to the side wall of the chute, with two vertical gaps and a width equal to twice the size of the particles used (s = 2d). The instrumentation included two high-speed cameras (300fps) and one spotlight. Camera 1 (C1) was located upstream at the lock gate location and Camera 2 was placed at downstream part of the chute, focusing on the vertical barrier site. A Particle Tracking Velocimetry (PTV) was applied to the set of images captured by the camera placed in the downstream area of the chute in a region of interest (ROI) of 4000 pixel width and 300 pixel height. Firstly, the raw data concerns to the particles coordinates (x,z), their along-chute and wall-normal trajectories and particle tag, detected with the PTV algorithm for the 31 repetitions held. The previous data was submitted to filtering processes where we converted particle trajectories into maps of these mean quantities by binning and constructing a data ensemble. To remove some detected outliers, a refinement of ensemble data was subsequently applied [1]. All of the solutions computed to build the pointed dataset were performed by means of Matlab algorithms. This dataset allows researchers to characterize the behaviour of granular processes that may occur in inclined channels partially or fully obstructed.