The present study focuses the development and the evaluation of humidity sensors based on reduced graphene oxide-tin oxide (rGO-SnO₂) nanocomposites, synthesized by a simple redox reaction between GO and SnCl₂. The physico-chemical characteristics of the nanocomposites were analyzed by XRD, TEM, FTIR, and Raman spectroscopy. The formation of SnO₂ crystal phase was observed through XRD. The SnO₂ crystal phase anchoring to the graphene sheet was confirmed through TEM images. For the preparation of the sensors, tantalum substrates were coated with the sensing material. The sensitivity of the fabricated sensor was studied by varying the relative humidity (RH) from 11% to 95% over a period of 30 days. The dependence of the impedance and of the capacitance with RH of the sensor was measured with varying frequency ranging from 1 kHz to 100 Hz. The long-term stability of the sensor was measured at 95% RH over a period of 30 days. The results proved that rGO-SnO₂ nanocomposites are an ideal conducting material for humidity sensors due to their high sensitivity, rapid response and recovery times, as well as their good long-term stability.
Keywords: nanocomposites; rGO-SnO2; relative humidity; sensor.