Polyethylene Composites with Segregated Carbon Nanotubes Network: Low Frequency Plasmons and High Electromagnetic Interference Shielding Efficiency

Materials (Basel). 2020 Mar 3;13(5):1118. doi: 10.3390/ma13051118.

Abstract

Polyethylene (PE) based composites with segregated carbon nanotubes (CNTs) network was successfully prepared by hot compressing of a mechanical mixture of PE and CNT powders. Through comparison with a composite comprising randomly distributed carbon nanotubes of the same concentration, we prove that namely the segregated CNT network is responsible for the excellent electrical properties, i.e. 10-1 S/m at 0.5-1% and 10 S/m at 6-12% of CNT. The investigation of the complex impedance in the frequency range 1 kHz-2 MHz shows that the sign of real part of the dielectric permittivity changes from positive to negative in electrically percolated composites indicating metal-like behavior of CNT segregated network. The obtained negative permittivity and AC conductivity behavior versus frequency for high CNT content (3%-12%) are described by the Drude model. At the same time, in contrast to reflective metals, high electromagnetic shielding efficiency of fabricated PE composites in the frequency range 40-60 GHz, i.e. close to 100% at 1 mm thick sample, was due to absorption coursed by multiple reflection on every PE-CNT segregated network interface followed by electromagnetic radiation absorbed in each isolated PE granule surrounded by conductive CNT shells.

Keywords: carbon nanotube; complex impedance; electromagnetic shielding; polyethylene; segregated composite.