To take advantage of the residues generated in the production of products from green coffee and due to the special interest in the compounds contained in the bean, a by-product obtained after the extraction of the oil was studied. The physical characterization of the green-coffee-bean by-product was carried out. Subsequently, the extraction of compound 5-CQA was carried out via leaching using central composition design 24 and evaluating factors such as temperature, time, solid/solvent ratio, and ethanol percentage, and its yield was quantified using HPLC. In addition, the response-surface methodology was used to maximize the efficiency of 5-CQA extraction and to perform the kinetic study. Yields of 59 ± 2 mg of 5-CQA/g from the by-product were obtained, and by selecting the best leaching conditions, the kinetic study was performed at 45, 60, and 75 °C, increasing the yield to a total of 61.8 ± 3 mg of 5-CQA/g. By applying the kinetic model of mass transfer, a fit of R2 > 0.97 was obtained, with KLa values between 0.266 and 0.320 min−1. This study showed an approach to optimize the 5-CQA extraction conditions, resulting in a simple, fast, reproducible, accurate, and low-cost method.
Keywords: 5-CQA; extraction; green-coffee by-product; kinetic; optimization.