Improvement of the electro-bioremediation process of a non-polar herbicide-polluted soil by means of surfactant addition

Oxyfluorfen is a non-polar herbicide that may cause severe soil pollution. The present work studies the possible improvement due to surfactant addition in the efficiency of electro-bioremediation of a clay soil polluted which such a non-polar, low-mobility pollutant. Two-week-long batch electro-bioremediation experiments were performed in a bench-scale device. Oxyfluorfen-polluted soil (20 mg kg^-1) was inoculated with an acclimated microbial culture, and several experiments were performed using different surfactant concentrations in the electrode wells (0.0, 2.5, 5.0, 10.0 and 20.0 g L^-1 of SDS, sodium dodecyl sulphate). Experiments were performed under 1.0 V cm^-1 and electrode polarity reversal. It was observed that the electro-osmotic flow (EOF) increased with SDS concentration and that SDS was successfully distributed across the soil, probably improving the oxyfluorfen mobility. Additionally, microbiological activity was fully maintained during the experiments. Electro-bioremediation without SDS removed 14% of the oxyfluorfen, while under 2.5 g L^-1 SDS, the efficiency increased to 22% because of an expected improvement in the contact between the different species in the soil. However, higher SDS concentrations (between 10.0 and 20.0 g L^-1) caused a decrease in the oxyfluorfen removal efficiency, as SDS is an easily biodegradable compound and was preferably used as substrate by the microbial culture instead of oxyfluorfen. Additionally, the use of high concentrations of SDS was clearly inefficient, as high amounts of the surfactant were lost through the EOF, and even low amounts of oxyfluorfen were removed to the electrode wells, which means that ex situ treatment of the polluted water would be needed.