Waste Activated Sludge-High Rate (WASHR) Treatment Process: A Novel, Economically Viable, and Environmentally Sustainable Method to Co-Treat High-Strength Wastewaters at Municipal Wastewater Treatment Plants

Bioengineering (Basel). 2023 Aug 29;10(9):1017. doi: 10.3390/bioengineering10091017.

Abstract

High-strength wastewaters from a variety of sources, including the food industry, domestic septage, and landfill leachate, are often hauled to municipal wastewater treatment plants (WWTPs) for co-treatment. Due to their high organic loadings, these wastewaters can cause process upsets in both a WWTP's liquid and solids treatment trains and consume organic treatment capacity, leaving less capacity available to service customers in the catchment area. A novel pre-treatment method, the Waste Activated Sludge-High Rate (WASHR) process, is proposed to optimize the co-treatment of high-strength wastewaters. The WASHR process combines the contact stabilization and sequencing batch reactor processes. It utilizes waste activated sludge from a municipal WWTP as its biomass source, allowing for a rapid start-up. Bench-scale treatment trials of winery wastewater confirm the WASHR process can reduce loadings on the downstream WWTP's liquid and solids treatment trains. A case study approach is used to confirm the economic viability and environmental sustainability of the WASHR process compared to direct co-treatment, using life-cycle cost analyses and greenhouse gas emissions estimates.

Keywords: WASHR; co-treatment; high-rate treatment; high-strength wastewater; waste activated sludge-high rate; winery wastewater.