The use of renewable resources for powering self-ignition engines in European Union countries involves a high demand for renewable energy which is not accompanied by the development of its production infrastructure. The application of biofuel in vehicle powering is supposed to provide reductions in greenhouse gas emissions and an increase in the share of renewable energy resources in the total energy consumption. The study includes the analyses of power unit exhaust components, such as oxygen, carbon monoxide, nitric oxides, carbonizers, carbon dioxide and a quantity of exhaust particles contained in exhaust gases. Tests using an exhaust gas analyzer and a vapor analyzer were conducted. Three high-pressure engines, characterized by direct fuel injection, were tested. The vehicle computer software adjustments included increasing the fuel dose and the air load. Mixtures of diesel oil and fatty acid methyl esters were used in the tests. Based on the results, a statistical analysis was performed and an assessment model was developed to understand the functioning of the research objects fueled with these mixtures, with simultaneous software changes in the vehicle computers. On the basis of the conducted analysis, it was found that only 30% of fatty acid methyl ester additives to diesel oil reduced the performance parameters of the drive units.
Keywords: biofuel; combustion engine; components of combustion engine exhaust gases; controllers of a vehicle computer; renewable energy sources.