A 17-level quadruple boost switched-capacitor inverter with reduced devices and limited charge current

Majid Hosseinpour; Masoumeh Derakhshandeh; Ali Seifi; Mahdi Shahparasti

doi:10.1038/s41598-024-56717-8

A 17-level quadruple boost switched-capacitor inverter with reduced devices and limited charge current

Sci Rep. 2024 Mar 14;14(1):6233. doi: 10.1038/s41598-024-56717-8.

Authors

Majid Hosseinpour¹, Masoumeh Derakhshandeh², Ali Seifi², Mahdi Shahparasti³

Affiliations

¹ Department of Electrical and Computer Engineering, University of Mohaghegh Ardabili, Ardabil, Iran. hoseinpour.majid@uma.ac.ir.
² Department of Electrical and Computer Engineering, University of Mohaghegh Ardabili, Ardabil, Iran.
³ School of Technology and Innovations, University of Vaasa, Vaasa, Finland.

Abstract

In this paper, a quadruple boost switched-capacitor multi-level inverter is proposed. The proposed structure utilizes a DC source, 11 switches, and a diode to achieve 17-level output voltage levels. This structure consists of three capacitors with the ability for self-balancing voltages. The capacitors achieve automatic voltage balancing through a series/parallel connection with the input voltage source. To control the switching pulses of the switches, level-shifted pulse width modulation (LS-PWM) strategy has been employed. A comparative evaluation has been performed between the proposed structure and structures presented in recent articles, considering various parameters such as voltage gain, number of DC sources, number of semiconductor devices, maximum blocking voltage (MBV), and total standing voltage (TSV). Considering this comparison, the lower number of semiconductor devices for generating a 17-level output with suitable voltage gain, and especially the cost-effectiveness of the structure, are the main advantages of the proposed configuration. In addition, a soft charging method has been employed to limit the inrush current of capacitors. Moreover, the power losses of the proposed structure have been investigated, indicating its acceptable efficiency. Finally, for the analysis and validation of the proposed structure's performance, an experimental prototype has been implemented and evaluated under various conditions. The results indicate satisfactory performance of the proposed structure under various stable and dynamic operating conditions.