Steady-state modeling of the biodegradation performance of a multistage moving bed biofilm reactor (MBBR) used for on-site greywater treatment

Environ Sci Pollut Res Int. 2019 Jul;26(19):19047-19062. doi: 10.1007/s11356-018-3984-9. Epub 2019 Jan 5.

Abstract

In this study, the Activated Sludge Model No. 3 (ASM3) was applied for the simulation of the removal of organics and nitrogen in a multistage moving bed biofilm reactor (MBBR) used for biological greywater treatment. The data related to the characterization of the greywater were collected over a period of 5 months to be investigated in the model. The reactor showed a high performance for the removal of chemical oxygen demand (COD), dissolved organic carbon (DOC), biological oxygen demand (BOD5), ammonia (NH4-N), and total nitrogen (TN) with a removal efficiency of 93%, 80.7%, 99%, 89%, and 77%, respectively. The results of modeling showed a good correlation between simulated and experimental concentrations of COD issued from different reactors of the MBBR system. The adaptability of the ASM3 model to fit other parameters such as TN, NH4-N, total suspended solids (TSS), and the dissolved oxygen (DO) was also investigated for two selected reactors: reactor (R1) and the reactor (R5). The simulation results showed an acceptable correlation regarding the evolution of the investigated parameters in R1 and R5 and in the effluent except for total nitrogen TN. The adjustment of the stoichiometric parameters led to a satisfactory simulation of TN concentrations.

Keywords: Activated sludge model; Biocarriers; Greywater treatment; Modeling; Moving bed biofilm reactor (MBBR).

Publication types

  • Evaluation Study

MeSH terms

  • Ammonia / chemistry
  • Biodegradation, Environmental
  • Biofilms*
  • Biological Oxygen Demand Analysis
  • Bioreactors*
  • Nitrogen / chemistry
  • Sewage*
  • Water Purification / methods*

Substances

  • Sewage
  • Ammonia
  • Nitrogen