Quantifying salinity in heterogeneous coastal aquifers through ERT and IP: Insights from laboratory and field investigations

J Contam Hydrol. 2024 Mar:262:104322. doi: 10.1016/j.jconhyd.2024.104322. Epub 2024 Feb 15.

Abstract

The lithological and stratigraphical heterogeneity of coastal aquifers has a great influence on saltwater intrusion (SI). This makes it difficult to predict SI pathways and their persistence in time. In this context, electrical resistivity tomography (ERT) and induced polarization (IP) methods are receiving increasing attention regarding the discrimination between saltwater-bearing and clayey sediments. To simplify the interpretation of ERT data, it is commonly assumed that the bulk conductivity mostly depends on the conductivity of pore-filling fluids, while surface conductivity is generally disregarded in the spatial and temporal variability of the aquifers, particularly, once the aquifer is affected by the presence of saltwater. Quantifying salinities based on a simplified petrophysical relationship can lead to misinterpretation in aquifers constituted by clay-rich sediments. In this study, we rely on co-located data from drilled boreholes to formulate petrophysical relationships between bulk and fluid conductivity for clay-bearing and clay-free sediments. First, the sedimentary samples from the drilled wells were classified according to their particle size distribution and analyzed in the lab using spectral IP in controlled salinity conditions to derive their formation factors, surface conductivity, and normalized chargeability. Second, the deduced thresholds are applied on the field to distinguish clay-bearing sediments from brackish sandy sediments. The results are validated with logging data and direct salinity measurements on water samples. We applied the approach along the Luy River catchment and found that the formation factors and surface conductivity of the different unconsolidated sedimentary classifications vary from 4.0 to 8.9 for coarse-grained sand and clay-bearing mixtures, while normalized chargeability above 1.0 mS.m-1 indicates the presence of clay. The clay-bearing sediments are mostly distributed in discontinuous small lenses. The assumption of homogenous geological media is therefore leading to overestimating SI in the heterogeneous clay-bearing aquifers.

Keywords: Aquifer; Conductivity; Induced polarization; Resistivity; Saltwater intrusion.

MeSH terms

  • Clay
  • Environmental Monitoring / methods
  • Groundwater*
  • Salinity*
  • Sand
  • Tomography

Substances

  • Clay
  • Sand