The paper presents the effect of nitrogen ion implantation on the tool life of the tools commonly used in the furniture industry for drilling particleboards. Nitrogen ions with different accelerating voltages of 25, 40, 55, and 70 kV and a fluence of 5 × 1017 cm-2 were implanted into the surface of commercially available high-speed steel (HSS) drills, using the implanters without mass-separated ion beams. The tests were carried out in a computerized numerical control (CNC) machining center used in the furniture industry. Based on the measurements of the direct tool wear indicator (W), the drill wear curves were determined and the relative tool life index, standard deviation, coefficient of variation, and the implantation quality index of tool life were calculated. The studies have shown that the modification of the drill surface layer by the nitrogen ion implantation process increases the tool life. The obtained results allow the research to be the continued in a wider scope.
Keywords: CNC drilling; high-speed steel (HSS); nitrogen ion implantation; particleboard; tool life.