Industrial networks are introducing Internet of Things (IoT) technologies in their manufacturing processes in order to enhance existing methods and obtain smarter, greener and more effective processes. Global predictions forecast a massive widespread of IoT technology in industrial sectors in the near future. However, these innovations face several challenges, such as achieving short response times in case of time-critical applications. Concepts like in-network computing or edge computing can provide adequate communication quality for these industrial environments, and data plane programming has been proved as a useful mechanism for their implementation. Specifically, P4 language is used for the definition of the behavior of programmable switches and network elements. This paper presents a solution for industrial IoT (IIoT) network communications to reduce response times using in-network computing through data plane programming and P4. Our solution processes Message Queuing Telemetry Transport (MQTT) packets sent by a sensor in the data plane and generates an alarm in case of exceeding a threshold in the measured value. The implementation has been tested in an experimental facility, using a Netronome SmartNIC as a P4 programmable network device. Response times are reduced by 74% while processing, and delay introduced by the P4 network processing is insignificant.
Keywords: IoT; P4; data plane programming; industrial communications; time-critical.