The Study of Radioactive Contaminations within the Production Processes of Metal Titanium for Low-Background Experiments

Ultra-low-radioactivity titanium alloys are promising materials for the manufacture of low-background detectors which are being developed for experiments in astroparticle physics and neutrino astrophysics. Structural titanium is manufactured on an industrial scale from titanium sponge. The ultra-low-background titanium sponge can be produced on an industrial scale with a contamination level of less than 1 mBq/kg of uranium and thorium isotopes. The pathways of contaminants during the industrial production of structural titanium were analyzed. The measurements were carried out using two methods: inductively coupled plasma mass spectroscopy (ICP-MS) and gamma spectroscopy using high-purity germanium detectors (HPGes). It was shown that the level of contamination with radioactive impurities does not increase during the remelting of titanium sponge and mechanical processing. We examined titanium alloy samples obtained at different stages of titanium production, namely an electrode compaction, a vacuum arc remelting with a consumable electrode, and a cold rolling of titanium sheets. We found out that all doped samples that were studied would be a source of uranium and thorium contamination in the final titanium alloys. It has been established that the only product allowed obtaining ultra-low-background titanium was the commercial VT1-00 alloy, which is manufactured without master alloys addition. The master alloys in the titanium production process were found cause U/Th contamination.