Robust Mesoporous CoMo/γ-Al2O3 Catalysts from Cyclodextrin-Based Supramolecular Assemblies for Hydrothermal Processing of Microalgae: Effect of the Preparation Method

ACS Appl Mater Interfaces. 2018 Apr 18;10(15):12562-12579. doi: 10.1021/acsami.7b16185. Epub 2018 Apr 4.

Abstract

Hydrothermal liquefaction (HTL) is a promising technology for the production of biocrude oil from microalgae. Although this catalyst-free technology is efficient under high-temperature and high-pressure conditions, the biocrude yield and quality can be further improved by using heterogeneous catalysts. The design of robust catalysts that preserve their performance under hydrothermal conditions will be therefore very important in the development of biorefinery technologies. In this work, we describe two different synthetic routes (i.e., impregnation and cyclodextrin-assisted one-pot colloidal approach), for the preparation in aqueous phase of six high surface area CoMo/γ-Al2O3 catalysts. Catalytic tests performed on the HTL of Nannochloropsis gaditana microalga indicate that solids prepared by the one-pot colloidal approach show higher hydrothermal stability and enhanced biocrude yield with respect to the catalyst-free test. The positive effect of the substitution of the block copolymer Tetronic T90R4 for Pluronic F127 in the preparation procedure was evidenced by diffuse reflectance UV-visible spectroscopy, X-ray diffraction, N2-adsorption-desorption, and H2-temperature-programmed reduction measurements and confirmed by the higher quality of the obtained biocrude, which exhibited lower oxygen content and higher-energy recovery equal to 62.5% of the initial biomass.

Keywords: biocrude; cyclodextrin; heterogeneous catalysts; hydrothermal liquefaction; microalgae.

MeSH terms

  • Aluminum Oxide / chemistry*
  • Biofuels
  • Biomass
  • Catalysis
  • Cobalt
  • Cyclodextrins
  • Microalgae
  • Molybdenum
  • Porosity
  • Temperature

Substances

  • Biofuels
  • Cyclodextrins
  • Cobalt
  • Molybdenum
  • Aluminum Oxide