42 cervical interbody fusions with iliac bone graft and titanium plate fixation were performed between October 1991 and March 1994. The mean follow up period in this study was 10.7 months. In 32 cases fusion was done for 1 and in 10 cases for 2 segments. 2 different types of plates were used. In 25 cases micro-osteosynthesis plates and screws with 2.7 mm diameter were used, and in 17 cases cervical H-plates and screws with 3.5 mm diameter. A favourable outcome was achieved in 31 of 42 cases (74%). Satisfactory pain relief was achieved in 90%. For radicular motor deficit good results were obtained in 84% and for cervical myelopathy in 54%. The 2 different types of plates showed a remarkable difference in the clinical outcome. The results were regarded favourable in 15 of 25 microplate fusions (60%) and in 16 of 17 H-plate fusions (94%). Compression of the bone graft was seen in 5 patients of the micro plate group, however, radiological signs for fusion were present in all 42 cases at follow up. Major surgical complications, damage to neural structures or neurological deterioration did not occur in this study. Plate fixation in cervical interbody fusions seems to be a safe procedure and may reduce graft related complications at the fusion site if the plates and screws are sufficiently well proportioned. A favourable impact upon the results for cervical interbody fusion might be expected and should be further investigated in a long term follow up study.