The mechanical properties of the human cervical spinal cord in vitro

Ann Biomed Eng. 1996 Jan-Feb;24(1):67-74. doi: 10.1007/BF02770996.

Abstract

The response of spinal cord tissue to mechanical loadings is not well understood. In this study, isolated fresh cervical spinal cord samples were obtained from cadavers at autopsy and tested in uniaxial tension at moderate strain rates. Stress relaxation experiments were performed with an applied strain rate and peak strain in the physiological range, similar to those seen in the spinal cord during voluntary motion. The spinal cord samples exhibited a nonlinear stress-strain response with increasing strain increasing the tangent modulus. In addition, significant relaxation was observed over 1 min. A quasilinear viscoelastic model was developed to describe the behavior of the spinal cord tissue and was found to describe the material behavior adequately. The data also were fitted to both hyperelastic and viscoelastic fluid models for comparison with other data in the literature.

Publication types

  • Research Support, U.S. Gov't, P.H.S.

MeSH terms

  • Adult
  • Aged
  • Aged, 80 and over
  • Biomechanical Phenomena
  • Elasticity
  • Humans
  • In Vitro Techniques
  • Linear Models
  • Middle Aged
  • Models, Biological
  • Reproducibility of Results
  • Spinal Cord / physiology*
  • Stress, Mechanical
  • Tensile Strength / physiology
  • Weight-Bearing / physiology*