In the natural environment, antlers have a significant mechanical structure that protects the deer head from injury. In this paper, the mechanical properties of antlers were evaluated through quasi-static compression tests and microstructural observation of samples from antlers, and the relationship between the sampling position, load direction, and microstructure and their mechanical properties were investigated. Compression experiments confirmed that the tines had the strongest mechanical properties, followed by the main beams and finally the brow tines. The mechanical properties of the test specimens subjected to axial compression were higher than those of lateral compression. The axial load test of the longitudinal sample of the tine of the antler has the best mechanical properties. Its specific energy absorption is 51.33 J/g, the peak crushing force is 1.26 kN, and the mean crushing force is 1.47 kN. There are many tubular structures in the transverse sections of antlers, and the distribution of fibers in the vertical direction is laminar with alternating rows forming a helical structure. Tubular structures were found to be prevalent in some of the better biomechanical structures by comparison. Numerical modeling simulations to describe the effect of tubular structures on the mechanical properties of antlers. The simulation results show that the increase in the size of the tubular structure improves its energy absorption within the variation of a 20% increase in the size of the long and short axis. These findings provide a theoretical and experimental basis for the design of energy-absorbing structures. RESEARCH HIGHLIGHTS: In this paper, transverse and longitudinal samples were taken from the main beam, tine, and brow tine of antlers, and axial and lateral compression were carried out, respectively. In this paper, quasi-static compression experiments were carried out on antler samples to study the effects of sampling position, loading direction, and microstructure on antler mechanical properties. By means of microstructure observation and numerical modeling, it is determined that the size of the antler Havel tube has an effect on its mechanical properties.
Keywords: antler; mechanical property; microstructure; numerical simulation; sampling position.
© 2024 Wiley Periodicals LLC.