Flir One® As A Predicting Factor for Burn Wound Conversion: A Preliminary Report

Ann Burns Fire Disasters. 2023 Jun 30;36(2):165-171. eCollection 2023 Jun.

Abstract

Burn area may progress into a more profound wound, known as burn wound conversion. Early prediction of burn wound conversion guides clinicians in their treatment decision. This study aimed to assess the reliability of FLIR One® in predicting burn wound conversion. We conducted a prospective cohort study, including patients who were admitted to our tertiary hospital from December 2018 to December 2019. All adult patients with mid-dermal burn injury of less than 40% TBSA that occurred within 72 hours were included in our study. Thermal imaging FLIR One® was used to evaluate the difference between burn wound and healthy skin in the same area (DT1), and ImageJ software objectively measured the burn's extension. The examinations were done by a plastic surgeon on the 1st and the 3rd day of admission. Data were later compared and statistically analyzed. A total of 157 wound samples were collected from 40 patients - a slightly higher number were found in males (57.5%). The major cause of burn was gas explosion (50%), mostly with less than 20% TBSA (55%). The area under the curve (AUC) for DT1 was 0.884 (95% CI: 0.822 - 0.945) p<0.05 with a cut-off point at DT1 more than 1.25°C lower than unburned skin. However, there was no correlation between DT1 and extension of the wound area. Thermal difference (DT1), measured using thermal imaging FLIR One® could be considered as a predictor of burn wound conversion from mid-dermal to deep dermal, with the optimal cut-off point of 1.25°C lower than unburned skin.

Une zone brûlée est susceptible de s’approfondir. La prédiction précoce de ce phénomène pourrait orienter la stratégie thérapeutique. Cette étude a pour but d’évaluer la fiabilité de FLIR One® dans ce but. Il s’agit d’une étude prospective de cohorte auprès de patients hospitalisés entre décembre 2018 et décembre 2019, auprès des patients hospitalisés dans les 72 h suivant une brûlure concernant <40% SCT avec atteinte intermédiaire. La différence de température entre zone brûlée et zone saine dans la même zone (DT1) a été mesurée par FLIR One®, le logiciel ImageJ permettant de mesurer objectivement l’étendue de la brûlure. Les examens étaient réalisées par un chirurgien plasticien à J1 et J3. Les données de 157 zones chez 40 patients ont été secondairement analysées. Il y avait un peu plus de zones brûlées chez des hommes (57,5%). La moitié des brûlures étaient consécutives à des explosions, et touchaient le plus souvent (55%) moins de 20% SCT. L’AUC de DT1 était de 0,884 (IC95 à p<0,05 : 0,822-0,945) pour un seuil à plus de 1,25°C de différence entre zones brûlée et saine. Il n’y avait pas de corrélation entre DT1 et l’étendue de la zone atteinte. DT1 mesurée par FLIR One® peut être considéré comme un bon prédicteur d’approfondissement de brûlure, au seuil de 1,25°C plus bas que la zone saine.

Keywords: FLIR One®; burn; burn wound conversion; secondary burn progression; thermal imaging; thermography.

Publication types

  • Case Reports