Fixation of Proximal Tibial Fractures with Intramedullary Nail and Immediate Weightbearing: A Beneficial Alternative

Abstract

Newer intramedullary (IM) nails have become another option in the fixation of proximal tibia fractures. There is limited data on the successful use of these implants in intra-articular and extra-articular fractures of the proximal tibia, and no studies assessing the ability of these implants to maintain alignment with early weight bearing. Our objective was to determine whether immediate weight bearing after IM fixation, with or without supplemental plate or screw fixation, of proximal third tibial fractures (OTA/AO 41A-C) results in a change in alignment prior to union. 35 patients with 39 proximal tibia fractures from 2015 to 2020, all treated with IM nailing with or without supplemental plate or screw fixation, all made weight-bearing as tolerated following surgery, were included. The main outcomes were change in medial proximal tibial angle (MPTA) and posterior proximal tibial angle (PPTA) from initial post-operative films to final follow up. 12 fractures were OTA/AO 41 type A, 14 were type B, and 13 were type C. Mean initial MPTA was 87.0 +/-2.53 degrees, while mean initial PPTA was 79.6 +/- 3.50 degrees. The mean change in MPTA was 0.048 +/- 2.8 degrees (P=0.92), and mean change in PPTA was 0.264 +/- 3.67 degrees. 92.3% of fractures had normal final coronal plane alignment, with MPTA between 85.0 and 90.0 degrees. 89.7% of fractures had normal final sagittal plane alignment, with PPTA between 77.0 and 84.0 degrees. No patients required reoperation for malalignment. In OTA/AO type 41 fractures, immediate weight bearing after IM nail fixation, with or without supplemental plate or screw fixation when indicated, leads to minimal change in final coronal or sagittal alignment, and was well tolerated in most patients. [authors blinded for review].

Keywords: Alignment; Immediate weightbearing; Intramedullary nail; Proximal tibia fracture.