Seeking low-cost and eco-friendly electrode catalyst of microbial fuel cell (MFC) reactor has received extensive attention in recent decades. In this study, a sludge MFC was coupled with biochar-modified-anode (BC-300, BC-400, and BC-500) for actual brewery wastewater treatment. The physicochemical properties of biochar largely depended on the pyrolysis temperature, further affecting the removal efficiency of wastewater indicators. BC-400 MFC proved to be efficient for TN and NH4+-N removal, while the maximum removal efficiencies of COD and TP were achieved by BC-500 MFC, reaching respectively 97.14 % and 89.67 %. Biochar could promote the degradation of dissolved organic matter (DOM) in wastewater by increasing the electrochemical performances of MFC. The maximum output voltage of BC-400 MFC reached 410.24 mV, and the maximum electricity generation of 108.05 mW/m2 was also obtained, surpassing the pristine MFC (BCC-MFC) by 4.67 times. High-throughput sequencing results illustrated that the enrichment of electrochemically active bacteria (EAB) and functional bacteria (Longilinea, Denitratisoma, and Pseudomonas) in BC-MFCs, contributed to pollutants degradation and electron transfer. Furthermore, biochar affected directly the electrical conductivity of wastewater, simultaneously changing microbial community composition of MFC anode. Considering both enhanced removal efficiency of pollutants and increased power generation, the results of this study would offer technical reference for the application of biochar as MFC catalyst for brewery wastewater treatment.
Keywords: Bio-electrochemical system; Biochar; Brewery wastewater; Microbial fuel cell; Removal efficiency.
Copyright © 2024 Elsevier B.V. All rights reserved.