Visualization of training effectiveness is critical to patients' confidence and eventual rehabilitation. Here, an innovative magnetoinductive pressure sensor is proposed for monitoring hand rehabilitation in stroke hemiplegic patients. It couples the giant magneto and stress-impedance effects of a square spiral amorphous wire with the giant magnetoelastic effect of a polymer magnet (NdFeB@PDMS). The addition of the magnetoelastic layer results in a sensitivity improvement of 178%, a wide sensing range (up to 1 MPa), fast response/recovery times (40 ms), and excellent mechanical robustness (over 15 000 cycles). Further integration with an LC oscillation circuit enables frequency adjustment into the MHz range resulting in a sensitivity of 6.6% kPa-1 and outstanding linearity (R2 = 0.99717) over a stress range of up to 100 kPa. When attached to a commercial split-fingerboard, the sensor is capable of dynamically monitoring the force in each finger, providing a reading of the rehabilitation process. Unlike conventional inductive sensors, the sensor is based on an inductive force-responsive material (amorphous wire), which significantly boosts the sensitivity. The approach also demonstrates the potential of magnetoelasticity in static pressure sensing, which is highly sensitive to dynamic pressure only through electromagnetic induction. This makes it more suitable for long-term and continuous human health monitoring.
Keywords: giant magnetoelastic effect; giant magnetoimpedance effect; giant stress impedance effect; inductive sensors; rehabilitation monitoring.
© 2024 Wiley‐VCH GmbH.