Water pollutants harm ecosystems and degrade water quality. At the same time, many pollutants carry potentially valuable chemical energy, measured by chemical oxygen demand (COD). This study highlights the potential for energy harvesting during remediation using photocatalytic fuel cells (PCFCs), stressing the importance of economically viable and sustainable materials. To achieve this, this research explores alternatives to platinum cathodes in photocathodes and aims to develop durable, cost-effective photoanode materials. Here, zinc oxide nanorods of high density are fabricated on carbon fiber surfaces using a low-temperature aqueous chemical growth method that is simple, cost-efficient, and readily scalable. Alternatives to the Pt cathodes frequently used in PCFC research are explored in comparison with screen-printed PEDOT:PSS cathodes. The fabricated ZnO/carbon anode (1.5 × 2 cm2) is used to remove the model pollutant used here and salicylic acid from water (30 mL, 70 μM) is placed under simulated sunlight (0.225 Sun). It was observed that salicylic acid was degraded by 23 ±0.46% at open voltage (OV) and 43.2 ± 0.86% at 1 V with Pt as the counter electrode, degradation was 18.5 ± 0.37% at open voltage (OV) and 44.1 ± 0.88% at 1 V, while PEDOT:PSS was used as the counter electrode over 120 min. This shows that the PEDOT:PSS exhibits an excellent performance with the full potential to provide low-environmental-impact electrodes for PCFCs.
Keywords: PEDOT:PSS cathode; ZnO nanorods; aqueous chemical growth; carbon fibers; photocatalytic fuel cells (PCFCs); pollutant removal; salicylic acid; screen printing.