Assessment of the color stability of two silicone elastomers for maxillofacial prostheses upon exposure to cold beverages

J Oral Sci. 2024 Apr 16;66(2):116-119. doi: 10.2334/josnusd.23-0360. Epub 2024 Mar 5.

Abstract

Purpose: This study investigated the color stability of different commercially available silicone materials for facial prostheses upon exposure to everyday beverages. It was hypothesized that the beverages would not alter the color of the silicone under conditions simulating daily exposure.

Methods: Sixty specimens were fabricated using two materials - VST-50 and Silfy - and exposed to commercially available cold mineral water, tea, or coffee. Specimen color was evaluated on days 1 and 15. The color was measured with a spectrophotometer based on CIELab system and color differences were calculated as ΔE. Statistical analysis was performed using the Kruskal-Wallis test and Mann-Whitney U test.

Results: The mean ΔE values after 15 days of exposure to mineral water, cold green tea, and coffee were 1.016, 3.480, and 3.636 for VST-50 and 0.440, 0.798, and 1.425 for Silfy, respectively. Both materials showed significant differences in color, and VST-50 showed a greater color change than Silfy, especially for coffee.

Conclusion: Pigmented silicone elastomers have low color stability, leading to an overall color change in silicone prostheses when exposed to pigmented beverages. Color changes in such prostheses can be mitigated by selecting materials with better color stability to extend their longevity.

Keywords: color stability; everyday beverages; maxillofacial prosthesis; silicone elastomers.

MeSH terms

  • Beverages
  • Coffee
  • Color
  • Materials Testing
  • Maxillofacial Prosthesis*
  • Mineral Waters*
  • Prosthesis Coloring
  • Silicone Elastomers

Substances

  • Silicone Elastomers
  • Coffee
  • Mineral Waters