Solid-state lithium metal batteries (LMBs), constructed through the in situ fabrication of polymer electrolytes, are considered a critical strategy for the next-generation battery systems with high energy density and enhanced safety. However, the constrained oxidation stability of polymers, such as the extensively utilized polyethers, limits their applications in high-voltage batteries and further energy density improvements. Herein, an in situ fabricated fluorinated and crosslinked polyether-based gel polymer electrolyte, FGPE, is presented, exhibiting a high oxidation potential (5.1 V). The fluorinated polyether significantly improves compatibility with both lithium metal and high-voltage cathode, attributed to the electron-withdrawing -CF3 group and the generated LiF-rich electrolyte/electrode interphase. Consequently, the solid-state Li||LiNi0.6Co0.2Mn0.2O2 batteries employing FGPE demonstrate exceptional cycling performances of 1000 cycles with 78 % retention, representing one of the best results ever reported for polymer electrolytes. Moreover, FGPE enables batteries to operate at 4.7 V, realizing the highest operating voltage of polyether-based batteries to date. Notably, our designed in situ FGPE provides the solid-state batteries with exceptional cycling stability even at practical conditions, including high cathode loading (21 mg cm-2) and industry-level 18650-type cylindrical cells (1.3 Ah, 500 cycles). This work provides critical insights into the development of oxidation-stable polymer electrolytes and the advancement of practical high-voltage LMBs.
Keywords: fluorinated electrolyte; high-voltage; in situ crosslinking; long cycling; solid polymer electrolyte.
© 2024 Wiley‐VCH GmbH.