Low blank sampling method for measurement of the nitrogen isotopic composition of atmospheric NOx

PLoS One. 2024 Feb 29;19(2):e0298539. doi: 10.1371/journal.pone.0298539. eCollection 2024.

Abstract

The nitrogen isotopic composition of nitrogen oxide (NOx) is useful for estimating its sources and sinks. Several methods have been developed to convert atmospheric nitric oxide (NO) and/or nitrogen dioxide (NO2) to nitrites and/or nitrates for collection. However, the collection efficiency and blanks are poorly evaluated for many collection methods. Here, we present a method for collecting ambient NOx (NO and NO2 simultaneously) with over 90% efficiency collection of NOx and low blank (approximately 0.5 μM) using a 3 wt% hydrogen peroxide (H2O2) and 0.5 M sodium hydride (NaOH) solution. The 1σ uncertainty of the nitrogen isotopic composition was ± 1.2 ‰. The advantages of this method include its portability, simplicity, and the ability to collect the required amount of sample to analyze the nitrogen isotopic composition of ambient NOx in a short period of time. Using this method, we observed the nitrogen isotopic compositions of NOx at the Tsukuba and Yoyogi sites in Japan. The averaged δ15N(NOx) value and standard deviation (1σ) in the Yoyogi site was (-2.7 ± 1.8) ‰ and in the Tsukuba site was (-1.7 ± 0.9) ‰ during the sampling period. The main NOx source appears to be the vehicle exhaust in the two sites.

MeSH terms

  • Hydrogen Peroxide
  • Nitric Oxide*
  • Nitrogen Dioxide*
  • Nitrogen Isotopes
  • Nitrogen Oxides

Substances

  • Nitric Oxide
  • Nitrogen Dioxide
  • Hydrogen Peroxide
  • Nitrogen Oxides
  • Nitrogen Isotopes

Grants and funding

This study was supported by the Steel Foundation for Environmental Protection Technology in the form of a grant to KK [FY2021–2022] and by the Japan Society for the Promotion of Science (JSPS) in the form of Grants-in-Aid for Scientific Research (KAKENHI Program) to SI [JP22H05006], and SI and KK [JP22H05006].