Three-dimensional (3D) cell cultures have garnered significant attention in biomedical research due to their ability to mimic the in vivo cellular environment more accurately. The formation of 3D cell spheroids using hanging drops has emerged as a cost-effective and crucial method for generating uniformly-sized spheroids. This study aimed to validate the potential of a tip-refill wafer (TrW), a disposable laboratory item used to hold pipette tips, in facilitating 3D cell culture. The TrW allows for easy generation of hanging drops by pipetting the solution into the holes of the wafer. The mechanical stability of the hanging drops is ensured by the surface wettability and thickness of the TrW. Hanging drops containing 60-µL of solution remained securely attached to the TrW even when subjected to orbital shaking at 210 rpm. The exceptional resistance to mechanical shaking enabled the use of inertial focusing to facilitate spheroid formation. This was demonstrated through live/dead cell staining, quantitative polymerase chain reaction (qPCR) analysis, and cytoskeleton staining, which revealed that horizontal orbiting at 60 rpm for 15 min promoted cell aggregation and ultimately led to the formation of 3D spheroids. The spheroid harvest rate is 96.1% ± 3.5% across three TrWs, each containing 60 hanging drops. In addition to generating mono-culture 3D spheroids, the TrW-based hanging drop platform also enables the formation of multicellular spheroids, and on-demand pairing and fusion of spheroids. The TrW is a disposable item that does not require any fabrication or surface modification procedures, further enhancing its application potential in conventional biological laboratories.
Keywords: 3D cell culture; co-culture; hanging drop; tip-refill wafer; tumor spheroid.
© 2024 Wiley-VCH GmbH.