The zero-velocity update (ZUPT) method has become a popular approach to estimate foot kinematics from foot worn inertial measurement units (IMUs) during walking and running. However, the accuracy of the ZUPT method for stride parameters at sprinting speeds remains unknown, specifically when using sensors with characteristics well suited for sprinting (i.e., high accelerometer and gyroscope ranges and sampling rates). Seventeen participants performed 80-meter track sprints while wearing a Blue Trident IMeasureU IMU. Two cameras, at 20 and 70 meters from the start, were used to validate the ZUPT method on a stride-by-stride and on a cumulative distance basis. In particular, the validity of the ZUPT method was assessed for: (1) estimating a single stride length attained near the end of an 80m sprint (i.e., stride at 70m); (2) estimating cumulative distance from ∼20 to ∼70 m; and (3) estimating total distance traveled for an 80-meter track sprint. Individual stride length errors at the 70-meter mark were within -6% to 3%, with a bias of -0.27%. Cumulative distance errors were within -4 to 2%, with biases ranging from -0.85 to -1.22%. The results of this study demonstrate the ZUPT method provides accurate estimates of stride length and cumulative distance traveled for sprinting speeds.
Copyright: © 2024 Aristizábal Pla et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.