The influence of phosphate glass structure on results of thermal poling

J Phys Condens Matter. 2024 Feb 26;36(21). doi: 10.1088/1361-648X/ad271c.

Abstract

Two sodium phosphate glasses with different structure (meta- and orthophosphate ones) were thermally poled well below the glass transition temperatures. Glass with an orthophosphate structure (glass LA30) demonstrated a typical behavior of polarization current, that is, monotonic current decrease; however, in glass with a metaphosphate structure (glass LA10) the current first increased for 15-20 min and only then started monotonic decreasing. In spite of the similar sodium content, the current in LA10 glass exceeded the one in LA30 glass by about 10 times. This is explained by the capability of substituting intrinsic sodium ions by more mobile protons entering LA10 glass with a metaphosphate structure from the atmosphere. The other difference consists in the fact that the subanodic layer of LA10 glass after poling has many small cracks, while the subanodic layer of LA30 glass is crystallized. It should be emphasized that the crystallization of phosphate glasses under dc electric field below glass transition temperature is observed for the first time. In addition, after poling, no changes in the refractivity of both glasses were detected, but the generation of the second optical harmonic in LA30 glass was observed.

Keywords: crystallization; glass structure; polarization current; refractivity; second harmonic generation.