Electrophoretic Deposition as a Versatile Low-Cost Tool to Construct a Synthetic Polymeric Solid-Electrolyte Interphase on Silicon Anodes: A Model System Investigation

Rownak J Mou; Sattajit Barua; Ajay K Prasad; Thomas H Epps 3rd; Koffi P C Yao

doi:10.1021/acsami.3c06721

Electrophoretic Deposition as a Versatile Low-Cost Tool to Construct a Synthetic Polymeric Solid-Electrolyte Interphase on Silicon Anodes: A Model System Investigation

ACS Appl Mater Interfaces. 2024 Feb 14;16(6):6908-6919. doi: 10.1021/acsami.3c06721. Epub 2024 Feb 2.

Authors

Rownak J Mou¹, Sattajit Barua¹, Ajay K Prasad¹, Thomas H Epps 3rd², Koffi P C Yao¹

Affiliations

¹ Department of Mechanical Engineering, University of Delaware, Newark, Delaware 19716, United States.
² Department of Chemical and Biomolecular Engineering and Department of Materials Science and Engineering, University of Delaware, Newark, Delaware 19716, United States.

PMID: 38305735
PMCID: PMC10876055 (available on 2025-02-02)
DOI: 10.1021/acsami.3c06721

Abstract

The cycling of next-generation, high-capacity silicon (Si) anodes capable of 3579 mAh·g^-1 is greatly hindered by the instability of the solid-electrolyte interphase (SEI). The large volume changes of Si during (de)lithiation cause continuous cracking of the SEI and its reconstruction, leading to loss of lithium inventory and extensive consumption of electrolyte. The SEI formed in situ during cell cycling is mostly composed of molecular fragments and oligomers, the structure of which is difficult to tailor. In contrast, ex situ formation of a synthetic SEI provides greater flexibility to deposit long-chain, polymeric, and elastomeric components potentially capable of maintaining integrity against the large ∼350% volume expansion of Si while also enabling electronic passivation of the surface for longer cycling and calendar life. Furthermore, polymers are amenable to structural modifications, and the desired elasticity can be targeted by selection of the SEI polymer feedstock. Herein, electrophoretic deposition (EPD) is used to apply chitosan as a synthetic SEI on model Si thin film electrodes. Comparison of synthetic SEIs obtained without (Si/Chit) and with CH₃COOLi (Si/Chit+CH₃COOLi) added during EPD is performed to demonstrate a facile route to tuning of the polymer SEI chemistry. Atomic force and scanning electron microscopy reveal that addition of CH₃COOLi at EPD assists in conformal deposition of the synthetic SEI. During electrochemical cycling, the Chit+CH₃COOLi coating nearly doubles the capacity retention versus the reference bare Si thin film. X-ray photoelectron and Fourier transform infrared spectroscopy reveal that CH₃COOLi caps the -NH₂ groups of chitosan through amidation during EPD, which suppresses the catalytic reduction of the electrolyte. The presented approach demonstrates and validates EPD as a low-capital route to achieving and chemistry-tuning synthetic SEIs on Si electrodes. More broadly, the method is a promising avenue toward controlled and tailored polymeric SEIs on various conversion-type electrodes with high particle volumetric expansion.

Keywords: chitosan; electrophoretic deposition; silicon anode; solid-electrolyte interphase; synthetic SEI.