Biobased Acrylic Latexes/Sodium Carboxymethyl Cellulose Aqueous Binders for Lithium-Ion NMC 811 Cathodes

Ana Clara Rolandi; Aitor Barquero; Cristina Pozo-Gonzalo; Iratxe de Meatza; Nerea Casado; Maria Forsyth; Jose R Leiza; David Mecerreyes

doi:10.1021/acsapm.3c02167

Biobased Acrylic Latexes/Sodium Carboxymethyl Cellulose Aqueous Binders for Lithium-Ion NMC 811 Cathodes

ACS Appl Polym Mater. 2024 Jan 8;6(2):1236-1244. doi: 10.1021/acsapm.3c02167. eCollection 2024 Jan 26.

Authors

Ana Clara Rolandi^{1

2

3}, Aitor Barquero³, Cristina Pozo-Gonzalo¹, Iratxe de Meatza², Nerea Casado^{3

4}, Maria Forsyth^{1

3

4}, Jose R Leiza³, David Mecerreyes^{3

4}

Affiliations

¹ Institute for Frontier Materials, Deakin University, Melbourne, Victoria 3125, Australia.
² CIDETEC Basque Research and Technology Alliance (BRTA), Paseo Miramon 196,Donostia-San Sebastian 20014, Spain.
³ POLYMAT and Applied Chemistry Department, Faculty of Chemistry, University of the Basque Country UPV/EHU, Joxe Mari Korta center, Donostia-San Sebastián 20018, Spain.
⁴ IKERBASQUE, Basque Foundation for Science, Bilbao 48009, Spain.

Abstract

The increasing demands for sustainable energy storage technologies have prompted extensive research in the development of eco-friendly materials for lithium-ion batteries (LIBs). This research article presents the design of biobased latexes, which are fluorine-free and rely on renewable resources, based on isobornyl methacrylate (IBOMA) and 2-octyl acrylate (2OA) to be used as binders in batteries. Three different compositions of latexes were investigated, varying the ratio of IBOMA and 2OA: (1) Poly2OA homopolymer, (2) Poly(2OA_0,6-co-IBOMA_0,4) random copolymer, and (3) PolyIBOMA homopolymer. The combination of the two monomers provided a balance between rigidity from the hard monomer (IBOMA) and flexibility from the soft one (2OA). The study evaluated the performance of the biobased latexes using sodium carboxymethyl cellulose (CMC) as a thickener and cobinder by fabricating LiNi_0.8Mn_0.1Co_0.1O₂ (NMC 811) cathodes. Also, to compare with the state of the art, organic processed PVDF electrodes were prepared. Among aqueous slurries, rheological analysis showed that the CMC + Poly(2OA_0,6-co-IBOMA_0,4) binder system resulted in the most stable and well-dispersed slurries. Also, the electrodes prepared with this latex demonstrated enhanced adhesion (210 ± 9 N m^-1) and reduced cracks compared to other aqueous compositions. Electrochemical characterization revealed that the aqueous processed cathodes using the CMC + Poly(2OA_0,6-co-IBOMA_0,4) biobased latex displayed higher specific capacities than the control with no latex at high C-rates (100.3 ± 2.1 vs 64.5 ± 0.8 mAh g^-1 at 5C) and increased capacity retention after 90 cycles at 0.5C (84% vs 81% for CMC with no latex). Overall, the findings of this study suggest that biobased latexes, specifically the CMC + Poly(2OA_0,6-co-IBOMA_0,4) composition, are promising as environmentally friendly binders for NMC 811 cathodes, contributing to the broader goal of achieving sustainable energy storage systems.