Traditional lead-based primary explosives present challenges in application to micro-energetics-on-a-chip. It is highly desired but still remains challenging to design a primary explosive for the development of powerful yet safe energetic films. Copper-based azides (Cu(N3)2 or CuN3, CA) are expected to be ideal alternatives owing to their properties such as excellent device compatibility, excellent detonation performance, and low environmental pollution. However, the significantly high electrostatic sensitivity of CA limits its use in micro-electro-mechanical systems (MEMS). This study presents an in situ electrochemical approach to preparing and modifying a CA film with excellent electrostatic safety using a Cu chip. Herein, a CA film is prepared by employing Cu nanorod arrays as precursors. Next, polypyrrole (PPy) is directly coated on the surface of the CA materials to produce a CA@PPy composite energetic film using the electrochemical process. The results show that CuN3 is first generated and gradually oxidized to Cu(N3)2, essentially forming enclosed nest-like structures during electrochemical azidation. The microstructure and composition of the product can be regulated by varying the current density and reaction time, which leads to controllable heat output of the CA from 521 to 1948 J g-1. Notably, the composite energetic film exhibits excellent electrostatic sensitivity (2.69 mJ) owing to the excellent conductivity of PPy. Thus, this study offers novel ideas for the further advances of composite energetic materials and applications in MEMS explosive systems.