The surfactant solution is crucial in facilitating the spontaneous imbibition process for the recovery of oil in tight reservoirs. Further investigation is required to examine the fluid flow in porous mediums and the process of crude oil stripping by a surfactant solution during spontaneous imbibition. Hence, this study aims to determine the free motion properties of oil and water in porous mediums using the finite-element approach to solve the multiphase flow differential equation, taking into account the capillary pressure. An investigation was conducted to examine the impact of oil viscosity and interfacial tension on the mean liquid flow rate and oil volume fraction. An experimental study was conducted to investigate the impact of surface tension, interfacial tension, and wetting angle on crude-oil-stripping efficiency. The findings indicate that the stripped crude oil migrated through porous mediums as individual oil droplets, exhibiting a degree of stochasticity in its motion. When the interfacial tension is reduced, the average velocity of the fluid in the system decreases. The crude oil exhibited a low viscosity, high flow capacity, and a high average flow rate within the system. Once the concentration of the surfactant solution surpasses a specific threshold, it binds with the oil to create colloidal aggregates, resulting in the formation of micelles and influencing the efficiency of the stripping process. As the temperature rises, the oil-stripping efficiency also increases. Simultaneously, an optimal range of wetting angle, surface tension, and interfacial tension could enhance the effectiveness of removing oil using surfactant solutions. The research results of this paper enrich the enhanced oil recovery mechanism of surfactant and are of great significance to the development of tight reservoirs.
Keywords: interfacial parameters; motion characteristics; oil stripping efficiency; porous medium.