A single-stage dual-source inverter using low-power components and microcomputers

Majid Ghani Varzaneh; Amirhossein Rajaei; Navid Kamali-Omidi; Ali Shams-Panah; Mohamadreza Khosravi

doi:10.1038/s41598-024-51513-w

A single-stage dual-source inverter using low-power components and microcomputers

Sci Rep. 2024 Jan 20;14(1):1804. doi: 10.1038/s41598-024-51513-w.

Authors

Majid Ghani Varzaneh¹, Amirhossein Rajaei², Navid Kamali-Omidi³, Ali Shams-Panah⁴, Mohamadreza Khosravi⁵

Affiliations

¹ Shiraz University of Technology, Shiraz, Iran. m.ghani@sutech.ac.ir.
² Shiraz University of Technology, Shiraz, Iran.
³ Islamic Azad University of Dezful, Dezful, Khozestan, Iran.
⁴ Islamic Azad University of Najafabad, Najafabad, Isfahan, Iran.
⁵ Weifang University of Science and Technology, Shandong, China.

Abstract

This paper is an attempt to provide a dual-source inverter, an intelligent inverter topology that links two isolated DC sources to a single three-phase output through single-stage conversion. The converter is designed to be utilized in hybrid photovoltaic fuel cell systems, among other renewable energy applications. The proposed dual-source inverter employs a single DC-AC converter, as opposed to conventional dual-source hybrid inverters which make use of several input DC-DC modules to obtain the voltage formed across the inverter's input DC-link. In the proposed topology, the semiconductor count is low, which leads to improved efficiency, cost, complexity, and reliability. The proposed topology makes use of two impedance networks connected by transformers, diodes, and capacitors. The regulation of the electrical power generated by primary sources and the independence of the converter on key factors like voltage and frequency are essential parameters in multi-input converters. This feature becomes highly prominent when the control algorithm is implemented by conventional processors. Viewed from this perspective, the control method described in this paper is worthy of consideration. The research work describes a 220-W/50 Hz prototype that employs Simple Boost-SPWM. Experimental results verify the analyses and corroborate the satisfactory performance of the suggested converter.