Air, a widely recognized dielectric material, is employed as a dielectric layer in this study. We present a triboelectric sensor with a laser-induced graphene (LIG) electrode and an air-trapped pad using silicone rubber (SR). A very thin device with a thickness of 1 mm and an effective gap for contact-separation between the films of silicone rubber and polyimide (PI) of 0.6 mm makes the device extremely highly sensitive for very low amplitudes of pressure. The fabrication of LIG as an electrode material on the surface of PI is the key reason for the fabrication of the thin sensor. In this study, we showed that the fabricated air-trapped padded sensor (ATPS) has the capability to generate an output voltage of ~32 V, a short-circuit current of 1.2 µA, and attain a maximum power density of 139.8 mW m-2. The performance of the ATPS was compared with a replicated device having a hole on the pad, allowing air to pass through during contact-separation. The observed degradation in the electrical output suggests that the trapped air in the pad plays a crucial role in enhancing the output voltage. Therefore, the ATPS emerges as an ultra-sensitive sensor for healthcare sensing applications.
Keywords: ATPS; LIG; PI; air-trapped pad; silicone rubber.