Characterization on vermicular graphite rate and tensile strength in vermicular graphite cast iron based on nonlinear ultrasonic technique

Abstract

Ultrasonic techniques have been widely used to detect the percentage of vermicular graphite, defects, etc. in vermicular graphite cast iron. The linear ultrasonic velocity method is the main ultrasonic method for characterizing vermicular graphite rate and tensile strength in the current study, however, it is often easy to misjudge the vermicular graphite rate due to its insignificant variation. This study explores the feasibility of using the nonlinear ultrasonic technique (NUT) to characterize the vermicular graphite rate and tensile strength. Based on the longitudinal critically refracted (LCR) wave detection model, an experimental study to detect the vermicular graphite rate and tensile strength of vermicular graphite cast iron is carried out using the nonlinear ultrasonic harmonic method, and compared with the ultrasonic velocity method. The experiment results show that the relative nonlinear parameter of the LCR wave decreases along with the increase of vermicular graphite rate and increases along with the increase of tensile strength, and it has higher detection sensitivity and resolution than ultrasonic velocity by analyzing the obtained data. The increase in the acoustic nonlinearity parameter (ANP) is related to the increase in the number of grain boundaries in the microstructure. Therefore, the relationship among microstructure, ANP, and mechanical properties of vermicular graphite cast iron can be established, and it's promising that a new approach might be developed for quickly detecting the vermicular graphite rate and corresponding tensile strength with the NUT.

Keywords: Acoustic nonlinearity parameter; Longitudinal critically refracted (LCR) wave; Tensile strength; Vermicular graphite cast iron; Vermicular graphite rate.