Ceramic laminate veneers which are a conservative approach to restoring anterior teeth, combining minimal preparation and esthetics. This study aims to evaluate the impact of the thickness of monolithic zirconia laminate veneers on their optical properties and color perception, comparing them to lithium disilicate. A total of 60 laminate veneers were prepared using two ceramic materials, divided into three groups for each material (n = 10) with thicknesses of 0.5, 0.7, and 1.0 mm. CIELab color parameters of the veneers were measured using a spectrophotometer and translucency parameters were calculated. The veneers were cemented onto uniform dies and final L, a, b values of the restorations were measured. The color difference between the different thicknesses was calculated using the CIEDE2000 formula. Two-way ANOVA and Bonferroni HSD post hoc tests were conducted to compare the color parameters (α = 0.05). The results showed that both material type (p < 0.001) and thickness (p < 0.001) influenced translucency values. The translucency values of zirconia veneers were significantly lower than those of lithium disilicate. The color differences (ΔE00) resulting from thickness changes (0.5-1.0 mm) were near or below the perception threshold for lithium disilicate, but distinct for zirconia restorations. In conclusion, monolithic zirconia veneers demonstrated lower translucency compared to lithium disilicate. Changing the material thickness affected the translucency of both materials, but not the color perception only for zirconia.
Keywords: Ceramics; Color perception; Dental veneers; Optical processes.
© 2023 The Authors.