Body channel communication (BCC) which uses the human body as the communication channel has shown better energy efficiency and security compared with air channel communication. This article presents a simple, stable, and high transfer rate BCC technique using Manchester encoding, capacitive termination, and digital signal transfer operation. Manchester encoding is used to realize the spectrum migration of the baseband signal, and digital signal transmission simplifies system design and improves signal stability. The chip is fabricated in 65-nm technology. The experimental results show that the proposed transceiver achieved the highest data rates of 60 Mbps and the measured RX sensitivity is -64dBm. And the chip is also used to set up a multi-sensor nodes communication system to realize the data interaction between one hub and eight slave sensors utilizing the human body as the communication medium.