Effect of Si Content on Microstructures and Electrochemical Properties of Al-xSi-3.5Fe Coating Alloy

Yufeng Wu; Ying Shen; Qi Wang; Yuhang Liu; Dongming Shi; Ya Liu; Xuping Su

doi:10.3390/ma16237407

Effect of Si Content on Microstructures and Electrochemical Properties of Al-xSi-3.5Fe Coating Alloy

Materials (Basel). 2023 Nov 28;16(23):7407. doi: 10.3390/ma16237407.

Authors

Yufeng Wu^{1

2}, Ying Shen^{1

2}, Qi Wang^{1

2}, Yuhang Liu^{1

2}, Dongming Shi¹, Ya Liu^{1

2}, Xuping Su^{1

2}

Affiliations

¹ School of Materials Science and Engineering, Changzhou University, Changzhou 213164, China.
² Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164, China.

Abstract

Hot-dip aluminum alloy is widely used in the engineering fields. However, during the aluminum plating process, Fe inevitably enters and reaches a saturation state, which has a significant impact on the corrosion resistance and microstructure of the coating. Currently, adding Si during the hot-dip aluminum process can effectively improve the quality of the coating and inhibit the Fe-Al reaction. To understand the effect of Si content on the microstructure and electrochemical performance of Al-xSi-3.5Fe coating alloys, the microstructure and post-corrosion morphology of the alloys were analyzed using SEM (Scanning Electron Microscope) and XRD (X-ray Diffraction). Through electrochemical tests and complete immersion corrosion experiments, the corrosion resistance of the coating alloys in 3.5 wt.% NaCl was tested and analyzed. The results show that the Al-3.5Fe coating alloy mainly comprises α-Al, Al₃Fe, and Al₆Fe. With the increase in Si addition, the iron-rich phase changes from Al₃Fe and Al₆Fe to Al₈Fe₂Si. When the Si content reaches 4 wt.%, the iron-rich phase is Al₉Fe₂Si₂, and the excess Si forms the eutectic Si phase with the aluminum matrix. Through SKPFM (Scanning Kelvin Probe Force Microscopy) testing, it was determined that the electrode potentials of the alloy phases Al₃Fe, Al₆Fe, Al₈Fe₂Si, Al₉Fe₂Si₂, and eutectic Si phase were higher than that of α-Al, acting as cathode phases to the micro-galvanic cell with the aluminum matrix, and the corrosion form of alloys was mainly galvanic corrosion. With the addition of silicon, the electrode potential of the alloy increased first and then decreased, and the corrosion resistance results were synchronous with it. When the Si content is 10 wt.%, the alloy has the lowest electrode potential and the highest electrochemical activity.

Keywords: Al-xSi-3.5Fe coating alloy; electrochemical performance; microstructure.

Grants and funding

The authors gratefully acknowledge the financial support from the National Science Foundation of China [No.52171003] and a project funded by the Priority Academic Program Development of Jiangsu higher education institutions are greatly acknowledged.