To address the issue of surface enrichment of A-site ions in perovskite and the resulting suppression of catalytic activity, the La0.8Sr0.2Mn0.8Cu0.2O3 was modified by treatment with dilute nitric acid (2 mol/L) and dilute acetic acid (2 mol/L). The results show that the effect of dilute nitric acid treatment on the morphology and catalytic activity of the catalyst is more significant. The specific surface area of the catalyst after dilute nitric acid treatment (268.78 m2/g) is seven times higher than before treatment (37.55 m2/g). The low-temperature catalytic oxidation activity of HCHO of the catalyst after dilute nitric acid treatment is significantly improved, achieving a 50% HCHO oxidation efficiency at 80 °C, while the original sample requires 127 °C to achieve a 50% HCHO conversion. The excellent catalytic activity of the catalyst after dilute nitric acid treatment is related to its large specific surface area, high surface-active site density, and abundant Mn4+ ions. Stability and water resistance experiments show that the catalyst after dilute nitric acid treatment has excellent reaction stability and good water resistance ability. The mechanism of the formaldehyde oxidation reaction is that formaldehyde is first oxidized to a dioxymethylene (DOM) intermediate and DOM dehydrogenation reaction is responsible for the formation of formate species (HCOO-).
Keywords: Acid treatment; Catalytic oxidation; Formaldehyde; Perovskite.
© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.