This work demonstrates sensitive and low-cost piezoelectric sensors on skin-friendly, ultrathin, and conformable substrates combined with organic electrochemical transistors (OECTs) for the detection and amplification of alternating low-voltage input signals. The fully screen-printed (SP) piezoelectric sensors were manufactured on commercially available tattoo paper substrates, while the all-printed OECTs, relying on an extended gate electrode architecture, were manufactured either by solely using SP or by combining SP and aerosol jet printing (AJP) on PET substrates. Applying a low-voltage signal (±25 mV) to the gate electrode of the SP+AJP OECT results in approximately five times higher current modulation as compared to the fully SP reference OECT. The tattoo paper-based substrate enables transfer of the SP piezoelectric sensor to the skin, which in turn allows for radial pulse monitoring when combined with the SP+AJP OECT; this is possible due to the ability of the conformable sensor to convert mechanical vibrations into voltage signals along with the highly sensitive current modulation ability of the transistor device to further amplify the output signal. The results reported herein pave the way toward all-printed fully conformable wearable devices with high sensitivity to be further utilized for the real-time monitoring of electrophysiological signals.
Keywords: OECT; PEDOT:PSS; aerosol jet printing; piezoelectric sensor; printed electronics; screen printing.