Cu2ZnSnS4 monograin layer solar cells for flexible photovoltaic applications

Marit Kauk-Kuusik; Kristi Timmo; Maris Pilvet; Katri Muska; Mati Danilson; Jüri Krustok; Raavo Josepson; Valdek Mikli; Maarja Grossberg-Kuusk

doi:10.1039/d3ta04541b

Cu₂ZnSnS₄ monograin layer solar cells for flexible photovoltaic applications

J Mater Chem A Mater. 2023 Oct 23;11(44):23640-23652. doi: 10.1039/d3ta04541b. eCollection 2023 Nov 14.

Authors

Marit Kauk-Kuusik¹, Kristi Timmo¹, Maris Pilvet¹, Katri Muska¹, Mati Danilson¹, Jüri Krustok¹, Raavo Josepson², Valdek Mikli¹, Maarja Grossberg-Kuusk¹

Affiliations

¹ Laboratory of Photovoltaic Materials, Tallinn University of Technology Ehitajate tee 5 Tallinn Estonia marit.kauk-kuusik@taltech.ee.
² Division of Physics, Tallinn University of Technology Ehitajate tee 5 Tallinn Estonia.

Abstract

Monograin powder technology is one possible path to developing sustainable, lightweight, flexible, and semi-transparent solar cells, which might be ideal for integration with various building and product elements. In recent years, the main research focus of monograin technology has centered around understanding the synthesis and optoelectronic properties of kesterite-type absorber materials. Among these, Cu₂ZnSnS₄ (CZTS) stands out as a promising solar cell absorber due to its favorable optical and electrical characteristics. CZTS is particularly appealing as its constituent elements are abundant and non-toxic, and it currently holds the record for highest power conversion efficiency (PCE) among emerging inorganic thin-film PV candidates. Despite its advantages, kesterite solar cells' PCE still falls significantly behind the theoretical maximum efficiency due to the large V_OC deficit. This review explores various strategies aimed at improving V_OC losses to enhance the overall performance of CZTS monograin layer solar cells. It was found that low-temperature post-annealing of CZTS powders reduced Cu-Zn disordering, increasing E_g by ∼100 meV and V_OC values; however, achieving the optimal balance between ordered and disordered regions in kesterite materials is crucial for enhancing photovoltaic device performance due to the coexistence of ordered and disordered phases. CZTS alloying with Ag and Cd suppressed non-radiative recombination and increased short-circuit current density. Optimizing Ag content at 1% reduced Cu_Zn antisite defects, but higher Ag levels compensated for acceptor defects, leading to reduced carrier density and decreased solar cell performance. Co-doping with Li and K resulted in an increased bandgap (1.57 eV) and improved V_OC, but further optimization is required due to a relatively large difference between measured and theoretical V_OC. Heterojunction modifications led to the most effective PCE improvement in CZTS-based solar cells, achieving an overall efficiency of 12.06%.

Publication types

Review