The Microwave Temperature and Humidity Profiler: Description and Preliminary Results

Joan Francesc Munoz-Martin; Xavier Bosch-Lluis; Omkar Pradhan; Shannon T Brown; Pekka P Kangaslahti; Alan B Tanner; Mehmet Ogut; Sidharth Misra; Boon H Lim

doi:10.3390/s23208554

The Microwave Temperature and Humidity Profiler: Description and Preliminary Results

Sensors (Basel). 2023 Oct 18;23(20):8554. doi: 10.3390/s23208554.

Authors

Joan Francesc Munoz-Martin¹, Xavier Bosch-Lluis¹, Omkar Pradhan², Shannon T Brown³, Pekka P Kangaslahti², Alan B Tanner³, Mehmet Ogut³, Sidharth Misra³, Boon H Lim^{3

4}

Affiliations

¹ Signal Processing and Networks Group, Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91011, USA.
² Microwave Systems Technology Group, Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91011, USA.
³ Microwave Instrument Science Group, Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91011, USA.
⁴ Blue Origin, Kent, WA 98032, USA.

Abstract

This manuscript presents the Microwave Temperature and Humidity Profiler (MTHP), a dual-band spectroradiometer designed for measuring multi-incidence angle temperature and humidity atmospheric profiles from an aircraft platform. The MTHP bands are at 60 GHz for measuring the oxygen complex lines, therefore at this band, MTHP has a hyperspectral radiometer able to provide 2048 channels over an 8 GHz bandwidth, and 183 GHz for measuring water vapor, which only uses four channels since this absorption band's spectral richness is simpler. The MTHP builds upon the Microwave Temperature Profiler (MTP) with the inclusion of the hyperspectral radiometer. The instrument's design, components, and calibration methods are discussed in detail, with a focus on the three-point calibration scheme involving internal calibration loads and static air temperature readings. Preliminary results from the Technological Innovation into Iodine and GV aircraft Environmental Research (TI3GER) campaign are presented, showcasing the instrument's performance during flights across diverse geographical regions. The manuscript presents successful antenna temperature measurements at 60 GHz and 183 GHz. The hyperspectral measurements are compared with a simulated antenna temperature using the Atmospheric Radiative Transfer Simulator (ARTS) showing an agreement better than R² > 0.88 for three of the flights analyzed. Additionally, the manuscript draws attention to potential Radio Frequency Interference (RFI) effects observed during a specific flight, underscoring the instrument's sensitivity to external interference. This is the first-ever airborne demonstration of a broadband and hyperspectral multi-incidence angle 60 GHz measurement. Future work on the MTHP could result in an improved spatial resolution of the atmospheric temperature vertical profile and, hence, help in estimating the Planetary Boundary Layer (PBL) with better accuracy. The MTHP and its hyperspectral multi-incidence angle at 60 GHz have the potential to be a valuable tool for investigating the PBL's role in atmospheric dynamics, offering insights into its impact on Earth's energy, water, and carbon cycles.

Keywords: atmosphere; calibration; mmWave; radiometry; sounding.

Grants and funding

80NM0018F0617/NASA/NASA/United States