Within the field of wearable devices, polydimethylsiloxane (PDMS) has long been one of the most prominent materials utilized. It is therefore unsurprising that demands for its usage has now extended beyond experimental works into computational simulations, particularly those involving finite element method (FEM). To replicate the mechanical properties of PDMS in FEM, an accurate constitutive model is required, preferably one that encompasses wide ranges of PDMS elasticity. In this study, we determine Mooney-Rivlin 5 parameters as the best hyperelastic model fitted against PDMS experimental data, and proceed to construct a parameter correlation plot combining PDMS of different elasticities together. Experimental validation using PDMS samples fabricated via 3D-printed molds is then performed using parameters extracted from this plot, showing good agreement between simulation and experimental result. In addition, to reflect model applicability, simulations related to basic mechanical deformations involved in flexible devices (compression, stretching, bending and twisting) are performed and analyzed. Further analysis is also performed to investigate the effect of combining different experimental datasets as input into the model. We expect our work to be potentially helpful to be applied as both framework and database for wearable device engineers and researchers who are experimenting with varying PDMS concentrations and modulus.
© 2023. The Author(s).