The electroenzymatic hydroxylation of 4-ethylbenzoic acid catalyzed by the recombinant unspecific peroxygenase from the fungus Agrocybe aegerita (rAaeUPO) was performed in a gas diffusion electrode (GDE)-based system. Enzyme stability and productivity are significantly affected by the way the co-substrate hydrogen peroxide (H2O2) is supplied. In this study, two in-situ electrogeneration modes of H2O2 were established and compared. Experiments under galvanostatic conditions (constant productivity of H2O2) were conducted at current densities spanning from 0.8 mA cm-2 to 6.4 mA cm-2. For comparison, experiments under H2O2-stat mode (constant H2O2 concentration) were performed. Here, four H2O2 concentrations between 0.06 mM and 0.28 mM were tested. A maximum H2O2 productivity of 5.5 µM min-1 cm-2 and productivity of 10.5 g L-1 d-1 were achieved under the galvanostatic condition at 6.4 mA cm-2. Meanwhile, the highest total turnover number (TTN) of 710,000 mol mol-1 and turnover frequency (TOF) of 87.5 s-1 were obtained under the H2O2-stat mode at concentration limits of 0.15 mM and 0.28 mM, respectively. The most favorable outcome in terms of maximum achievable TTN, TOF and productivity was found under the H2O2-stat mode at concentration limit of 0.2 mM. Here, a TTN of 655,000 mol mol-1, a TOF of 80.3 s-1 and a productivity of 6.1 g L-1 d-1 were achieved. The electrochemical H2O2-stat mode not only offers a promising alternative reaction concept to the well-established galvanostatic mode but also enhances the process performance of unspecific peroxygenases.
Keywords: Biocatalysis; Bioelectrocatalysis; Bioelectrochemical system; Electrosynthesis; Hydrogen peroxide.
Copyright © 2023. Published by Elsevier B.V.