Bottom trawling for flatfish by means of tickler chains has a high ecological impact due to the continuous seabed disturbance, low selectivity and high fuel costs. This issue could be significantly mitigated by using localized startle stimuli, triggered by a detection system that selectively targets flatfishes of landable size. Flatfish, however, constitute a significant challenge for remote detection, due to their low optical and acoustical signatures. Some species of predatory fish feeding on flatfish overcome this issue by using electroreception to localize they prey, even if it is buried in bottom sediments. We take this phenomenon as an inspiration in an attempt to develop a biomimetic remote fish detection technique based on electrical impedance measurements. We constructed a detection system including a set of electrodes and a low-cost analog front-end. The electrodes were mounted on a dedicated frame and dragged above a layer of sand inside a tank with sea water and several common sole (Solea solea). An underwater camera was used to acquire video recordings synchronized with impedance data for reference. We demonstrate that fish presence below the electrodes manifests itself by changes in the measured resistance and reactance values. This phenomenon occurs even if the fish is covered with a layer of sand. The results demonstrate the potential of bioinspired remote flatfish detection, which could be highly useful for monitoring or targeted stimulation.
Keywords: bottom trawling; electrical impedance; flatfish; remote sensing.
Creative Commons Attribution license.