Co-utilization of iron ore tailings and coal fly ash for porous ceramsite preparation: Optimization, mechanism, and assessment

Abstract

Maximizing the utilization of industrial by-products, such as iron ore tailings (IOTs) and coal fly ash (CFA), is crucial toward sustainable development. This study provides a meticulous insight into the optimization, mechanism, and assessment of the co-utilization of IOTs and CFA for the preparation of porous ceramsite. Micro-CT results revealed that the prepared ceramsite exhibited an exceptional porosity, peaking at 56.98%, with a wide range of pore diameters (3.55-959.10 μm) under optimal conditions (IOTs content at 76%, preheating at 550 °C for 15 min, and sintering at 1177 °C for 14 min), while maintaining good mechanical properties (water adsorption of 1.28%, comprehensive strength of 8.75 MPa, apparent density of 1.37 g/cm³, and bulk density of 0.62 g/cm³). The primary parameters affecting the porosity were identified and ranked as follows: sintering temperature > IOTs content > sintering time. The formation and growth of pores could be attributed to the equilibrium relationship between the liquid-phase surface tension and the gas expansion force, accompanied by pore wall thinning and pore merging. Notably, the prepared ceramsite is both ecologically feasible and economically rewarding, boasting a profit margin of 9.47 $/ton. The comprehensive life cycle assessment (LCA) conducted further highlights the potential of its large-scale implementation for promoting sustainable development. This study provides an innovative strategy for the co-utilization of IOTs and CFA, with advantages such as cost-effectiveness, ecological feasibility and scalability of production.

Keywords: Coal fly ash; Industrial solid-waste co-utilization; Iron ore tailings; Life cycle assessment; Porous ceramsite.